TMT-TC-2 Tip Tinner
RoHS Compliant

Thermaltronics TMT-FP-1 Rosin flux paste is a petrolatum-based soldering paste containing rosin. It is designed for lead and lead-free electronics applications and does not contain Zinc Chloride or Ammonium Chloride.

For Lead & Lead free applications
RoHS Compliant
Ideal for electronic soldering, repair & rework
No Clean Flux


Thermaltronics TMT-FP-1 Rosin Flux Paste should be used in the soldering, repair & rework of lead or lead-free electronics.

For best results, first clean the surface before soldering by removing corrosion, dirt, rust and other unwanted debris. Then apply a small amount of flux to all surfaces to be soldered. Finally, apply heat to the solder joint using a soldering iron. Once the flux starts to melt, apply solder to the joint while maintaining heat to form the solder joint.


Thermaltronics TMT-FP-1 Rosin Flux Paste are available in containers containing 56g (2 oz).


Avoid inhaling the flux fumes when in use.
Wash your hands thoroughly after handling TMT-FP-1 especially before eating or smoking.
Keep out of reach of children.
Dispose in accordance with Local, State and Federal Regulations.
None of the materials listed in this product are listed in OSHA, NTP, IARC as a carcinogen.